Fura pergola made with denser slats for use in playground and kindergarten.
Fura pergola made with denser slats for extra sun protection.
Fura is a traditional wooden fence and pergola system manufactured in easy-to-construct prefabricated sections. Each section is produced through traditional craftsmanship that makes it sturdy and strong. Furas’s modular design makes it easy to extend if longer versions are required. Individual fence sections can be attached to create outer walls, partitions, enclosures, etc. See the tab below "Guide: How to do it!".
Width: 235cm / 115 cm
Height: 110 / 145 / 180 / 220 cm
Post: 115 x 125 mm.
Wood components: 19 x 120 mm.
Trellis slats: 38 x 38 mm profile planed and with beveled top.
Rail: 38 x 125 mm.
Loggia beam: 19 x 125 mm.
Joist: 38 x 100 mm.
Parts of the Fura modular system:
Trellis / plank with or without supporting beams, in four heights and two widths.
Posts for straight-line attachment to planks, attachment at 90-degree angles, 135-degree angles and T-post, 90-degrees.
Pergola bars, overlays, loggia bars, cast iron parts.
Trellis / plank sections:
A, B, C, D, E, F, G, H, I, K, S: These planks have the dimensions C-C 235 cm. The same planks are available in C-C 115 cm modules, in the A2, B2 categories, etc.
The planks are available in different heights, 100 cm, 135 cm, 170 cm and 220 cm. See figures.
Supporting posts:
S2, S5, S8 and S9. The posts are available in four heights 110 cm, 145 cm, 180 cm and 220 cm. When choosing a post, start with the basic size, for example S2 / 110.
For a straight-line attachment, please state S2 / 110 post height 110 cm - straight attachment.
Attachments at 90-degree angles, 135-degree angles or T-posts are also available, please see the downloadable drawings. For example: S5 / 145 post height, 145 cm T-post, etc.
All posts are ground-mounted 5 cm above ground surface. 2 iron fittings are included with each post.
Pergola beams:
Available in four versions:
PB1 length C-C 115 cm | total length 160 cm
PB2 length C-C 235 cm | total length 280 cm
PB3 length C-C 235 cm | total length 300 cm. NOTE! Without recesses for lintels
PB4 length optional. NOTE! Without recesses for lintels
6 pergola booms are needed per 235 cm section
3 pergola beams are needed per 115 cm section
Overlay:
Available in three versions:
Ö1 length C-C 115 cm | total length 115 cm
Ö2 length C-C 235 cm | total length 235 cm
Ö3 any length
Loggia beams:
LB Loggia beam
6 loggia beams are needed per 235 cm section
3 loggia beams are needed per 115 cm section
Drawing templates and planks are available in AB-impregnated pine.
It is possible to make Fura child-friendly so that it fits preschool environments. This can be done with some trellises and the roof, where the pergola beams are closer. Contact Nola for more information.
BA for child-friendly
AB-impregnerad furu.
Lengths of cut wood. Cast iron parts for attaching the posts.
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.
Delivered in sections planks, posts, crossbeams, etc.
The wooden parts are nailed to each other. The posts can be ground-mounted with the anchoring fixtures included, 2 for each post. In freestanding versions, 4 fixtures are needed to secure each post.
The pine can be painted or oiled as needed. Avoid painting pressure-treated wood during the first year as the paint may not adhere to new wood. Maintained as needed.
Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
Trellis section with or without beams, in three heights and two widths. Planks A-U. Please refer to the drawings of our different planks.
Fura is a classic wooden pergola system manufactured in prefabricated sections that are easy to construct.
Fura a traditional wooden fence and pergola system manufactured in prefabricated sections that are easy to construct.
Fura is a traditional wooden fence and pergola system manufactured in easy-to-construct prefabricated sections. Each section is produced through traditional craftsmanship that makes it sturdy and strong. Furas’s modular design makes it easy to extend if longer versions are required. Individual fence sections can be attached to create outer walls, partitions, enclosures, etc. See the tab below "Guide: How to do it!".
