Seagull is a durable bicycle roof, designed with a silhouette in the shape of a bird's wing.
Like the wings of a bird, the roof of the Seagull bike shed is made in an aerodynamic shape that appears to be in flight. The overhead structure is crafted in streamlined supporting struts attached to a central girder and bolted to round supports. The roof is available as a single structure or as a double-sided design. Seagull is available in standard lengths of four, six and eight metres.
Single-sided version
Length of sections: 200 cm
Depth of reinforced roof glass: 6 cm
Number of parking spaces in outer section: 4. Number of parking spaces in mid-section: 5
C-C distance between parking spaces: 50 cm
C-C distance between poles: 200 cm
C-C distance between gable posts: 135 cm
Width of roof: 205 cm
Height of roof, back side: 160 cm
Height of roof, front side: 210 cm
Double-sided version
Length of sections: 200 cm
Depth of reinforced roof glass: 6 cm
Number of parking spaces in outer section: 4. Number of parking spaces in mid-section: 5
C-C distance between parking spaces: 43 cm
C-C distance between poles: 200 cm
C-C distance between gable posts: 135 cm
Width of roof: 360 cm
Height of roof, back side: 160 cm
Height of roof, front side: 210 cm
Individual dimensions
Main post: 114 x 5 mm
Roof follower: 60 x 3.6 mm
Wheel holder tube: 76.1 x 2 mm
Roof truss: 6mm laser cut steel.
Roof: 4 mm polycarbonate plastic.
Roof profile: 30 mm aluminum.
Back and side panels in 6 mm laminated glas.
C for any color of steel, at an additional cost.
GL for back and side panels in 6 mm laminated glas.
U for Seagull Bike shed without wheel-holders.
Goggle wheel-holders, with or without frame lock, added separately. 10 pcs for a starter section, 5 pcs for an extension section. 20 pcs for a double sided starting section and 10 pcs for a double sided extension section.
M for installation in pre-cast foundations.
N for surface mount.
All steel structural components are electro-galvanized and powder-coated black RAL 9005, gloss 20-30.
Bicycle holder in hot-dip galvanized steel.
The roof is transparent plastic (polycarbonate).
Fasteners are stainless steel.
Back and side panels in laminated glas.
Glass holder in cast zinc.
Roof profile in aluminum.
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Stainless steel is an iron alloy with at least 10.5% chromium that often has good resistance to corrosion (rust) and other chemical attacks. A common misconception about stainless steel is that it does not rust at all; it can in fact corrode, especially in environments near the sea with high humidity.
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Aluminum is a soft light metal that is silvery to gray in color. Depending on the alloy, aluminum usually has good corrosion resistance. It is common for the aluminum to be extruded into tubes or rolled into a plate in the desired material thickness.
Posts for installation in pre-cast foundations.
Delivered in sections for final assembly on site.
Products that are powder-coated can be touch-up painted with alkyd paint.
Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
Available with a single or double-side roof. The polycarbonate pieces forming the roof are available in thicker sizes if required.
An aerodynamically-shaped bicycle shelter available as a single structure for sheltering one row of bicycles or as a double-sided design.
Like the wings of a bird, the roof of the Seagull bike shed is made in an aerodynamic shape that appears to be in flight. The overhead structure is crafted in streamlined supporting struts attached to a central girder and bolted to round supports. The roof is available as a single structure or as a double-sided design. Seagull is available in standard lengths of four, six and eight metres.
