Örebro is formed by a length of bent steel resting on two legs. Double steel strips are designed to hold bicycle wheels securely in place, providing space for chains and locks to be securely fastened. Örebro’s simplicity enables it to blend in with outdoor urban settings and contemporary architecture. Single-sided and double-sided version are available, with spaces for eight bicycles or ten.
FOUR-WHEEL VERSION
Length: 200 cm
Height: 60 cm
Height of wheel holders: 45 cm
Distance between wheel holders: 50 cm
Depth of single-sided version: 17 cm
Depth of double-sided version: 30 cm
C-C distance between legs: 175 cm
Distance from ground to bottom of frame: 15 cm
FIVE-WHEEL VERSION
Length: 250 cm
Height: 60 cm
Height of wheel holders: 45 cm
Distance between wheel holders: 50 cm
Depth of single-sided version: 17 cm
Depth of double-sided version: 30 cm
C-C distance between legs: 175 cm
Distance from ground to bottom of frame: 15 cm
M för In-ground.
V = Wheel holders with a left-facing orientation
H = Wheel holders with a right-facing orientation
R = Wheel holders with a forward-facing orientation
Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.
Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Cast in ground.
Fully assembled.
Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.
Örebro is available as a single-sided bicycle rack with space for four or five bicycles. It can also be made double-sided with space for eight or ten bicycles. The wheel holders can be angled left, right or forward-facing.
Örebro is a classic bicycle rack that blends in with outdoor urban settings and architectural backdrops.
Örebro is formed by a length of bent steel resting on two legs. Double steel strips are designed to hold bicycle wheels securely in place, providing space for chains and locks to be securely fastened. Örebro’s simplicity enables it to blend in with outdoor urban settings and contemporary architecture. Single-sided and double-sided version are available, with spaces for eight bicycles or ten.
