The Paxa Light furniture group is a stylish alternative to the original Paxa series. Paxa Light has a "lighter" and more minimalist design than the other products in the Paxa family. The group includes a bench and table for indoor and outdoor environments.
Length: 166 cm
Width: 50 cm
Height: 45 cm
Sitting height: 47 cm
Vikt: 65 Kg
Dimension of pine slats in seat: 3.2 × 3.2 cm / 3.2 cm × 6.0 cm Height including backrest: 81 cm
Length: 166 cm
Width: 70 cm
Height: 75 cm
Dimension of pine slats in seat: 3.2 × 3.2 cm / 3.2 cm × 6.0 cm.
The parts used in the steel construction range from 0.4 cm to 1 cm in thickness.
N för Surface mount.
G = glazed pine, dark grey NCS 8502-B
GB = painted beech, dark grey NCS 8502-B (indoor use only)
C = glazed pine in any choice of colour alt powder-coated frame
CB = glazed beech in any choice of colour (indoor use only)
Additional fees apply for choice of non-stand colour.
When choosing painted wood, select an NCS colour. When choosing wood and steel parts in the same colour, choose a RAL colour for both.
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
Our FCS-marked Ipé is an extremely hard wood thanks to its high density. The hardness gives remarkably high physical durability and resistant to the effects of sun, rain, and other weather over decades.
The wood of the beech is hard and tough. The wood is striated, which means that the grains are evenly distributed over the entire annual ring. The annual rings are visible, and the wood has an even structure. The color of the wood is yellow, red or brownish-white.
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Freestanding product that is placed directly on the ground.
Delivered in parts for assembly on site. Tabletops, seats and backrests are delivered for final assembly on site with the screws provided. Bolts for securing the products to the surface are not included.
Stain glazed beech with water-based interior paint. It is important to prime if the primer has been worn off and the wood is open. Apply the paint in the NCS colour in which you purchased the furniture. The gloss should be 30.
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.
Ipé has a durability of up to 40 years if it is not treated with more than normal care. With regular oiling once a season with wood oil, the durability is up to 100 years. Untreated Ipé will turn from reddish brown to a more silver gray color over time. If you want to keep the brown color, it must be treated and maintained with wood oil.
Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order.
Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.
Table and bench, benches available with or without backrests or armrests.
The Paxa Light furniture group is a stylish alternative to the original Paxa series. Paxa Light has a "lighter" and more minimalist design than the other products in the Paxa family. The group includes a bench and table for indoor and outdoor environments.
The safety and wellbeing of passengers has been drastically improved. The local bus terminals situated at Råslätts Centrum and Viktoriaplan have been redesigned, and Nola’s outdoor shelters and public space seating are key parts of the project.
The safety and wellbeing of passengers has been drastically improved. The local bus terminals situated at Råslätts Centrum and Viktoriaplan have been redesigned, and Nola’s outdoor shelters and public space seating are key parts of the project.
Blenda is a designstudio based in Gothenburg, committed to designing furniture for public spaces. With design that works towards both interiors and urban exteriors, they have participated in many projects in the recent years. The products can be found across Sweden, for example in Stavanger Cultural Center, Museum of Modern Art in Stockholm, Arlanda Airport and Gothenburg City library. The studio is run by landscape architect Katarina Gunnarsson and Ingemar Holmlid.
