close

Paxa Light shown here in painted beech for indoor use. The frame and seat can be in the same RAL colour or in different colours.

Bänkarnas stativ är försedda med en gummilist som skyddar golv från repor. Klarlackerad bok för inomhusbruk.

Paxa Light

Bench

Design Blenda Design

A stylish contemporary bench for outdoor and indoor environments. Paxa Light has a "lighter" and more minimalist design than the other benches in the Paxa series. The bench can easily be combined with optional arm and backrests. This design is also available with a table, please see the Paxa Light furniture group.

Paxa light is environmentally-certified by the Swedish Construction Products Agency.

Certification

Dimensions and weight

Length: 166 cm
Width: 50 cm
Height: 45 cm
Sitting height: 47 cm
Vikt: 65 Kg

Dimension of pine slats in seat: 3.2 × 3.2 cm / 3.2 cm × 6.0 cm Height including backrest: 81 cm

Product numbers and combinations

U20-77Paxa Light bench, length 166 cm
U20-77/RYGGPaxa Light backrest
U20-79Paxa Light armrest
U20-77C/PÅBYGGPaxa Light bench additional section for extending the length
U20-77BPaxa Light in painted beech with rubber protectors on base, for indoor use only
U20-77B/PÅBYGGPaxa Light in painted beech additional section for extending the length, rubber protectors on base, for indoor use only
B11-05Additional fee for choice of non-standard wood
B11-06Additional fee for choice of non-standard RAL paint powder-coated on steel
B11-07Additional fee for choice of non-standard paint for wooden parts

Append to product number

N för Surface mount.
For the indoor version, choose 'B' below. A fee applies for choice of non-standard colours.
E = oiled oak
IPE = oiled ipe
G = glazed pine, NCS S 8502-B
B = glazed beech (for indoor use only)
C = glazed pine, any colour
CB = glazed beech, any colour (indoor use only)

Standard colours

RAL 9010
NCS S 8502-B
Gris 2900 Sablé
Noir 2200 Sablé

Materials and surface treatments

Pine

Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.

Ipé

Our FCS-marked Ipé is an extremely hard wood thanks to its high density. The hardness gives remarkably high physical durability and resistant to the effects of sun, rain, and other weather over decades.

Beech

The wood of the beech is hard and tough. The wood is striated, which means that the grains are evenly distributed over the entire annual ring. The annual rings are visible, and the wood has an even structure. The color of the wood is yellow, red or brownish-white.

Oak

Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.

Steel

Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.

Wood oil

Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.

Water-based glaze

Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Assembly and placement

Freestanding

Freestanding product that is placed directly on the ground.

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

Delivered in parts for assembly on site, bolts included.
If the backrest is ordered, it should be attached to the seat after delivery.

Maintenance

Oiled oak

Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.

Ipé

Ipé has a durability of up to 40 years if it is not treated with more than normal care. With regular oiling once a season with wood oil, the durability is up to 100 years. Untreated Ipé will turn from reddish brown to a more silver gray color over time. If you want to keep the brown color, it must be treated and maintained with wood oil.

Water-based glazed pine

Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order.

Powdercoated steel

Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.

Download our general maintenance advice

Variants

Bench with backrest and/or armrests.

Character

A streamlined bench crafted from smooth lengths of wood and a concrete base.

Paxa Light

Bench

Design Blenda Design

A stylish contemporary bench for outdoor and indoor environments. Paxa Light has a "lighter" and more minimalist design than the other benches in the Paxa series. The bench can easily be combined with optional arm and backrests. This design is also available with a table, please see the Paxa Light furniture group.

Paxa light is environmentally-certified by the Swedish Construction Products Agency.

Certification

Other products in furniture group
Designers

Blenda Design

Blenda is a designstudio based in Gothenburg, committed to designing furniture for public spaces. With design that works towards both interiors and urban exteriors, they have participated in many projects in the recent years. The products can be found across Sweden, for example in Stavanger Cultural Center, Museum of Modern Art in Stockholm, Arlanda Airport and Gothenburg City library. The studio is run by landscape architect Katarina Gunnarsson and Ingemar Holmlid.