close

Parco

Furniture Series

Design Broberg & Ridderstråle

When space is tight, outdoor furniture solutions like Parco make room for more. The group consists of sleek seating and a streamlined table that are easy to cluster together, making them ideal for compact spaces. The chairs are designed with a swivel function and contouring seats and backrests that provide additional comfort. The products can be mixed and matched to create customised seating arrangements in a variety of indoor and outdoor settings.

Certification

Dimensions and weight

Parco park bench

Length: 161 cm / 172 cm
Height: 77 cm
Sitting height: 45 cm
Depth: 51 cm
Vikt: 32 kg

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate, armrest in 6 mm sheet steel
The support post Ø is 60 mm
The baseplate Ø is 50 mm
The bolthole Ø is 13 mm for M12 bolts

Parco round table

Height: 72 cm
Ø: 66 cm / 123 cm
Vikt: Ø 66 cm: 18 kg / Ø 123 cm: 36 kg

Parco Bench

Width: 161 cm
Height: 47 cm
Depth: 42 cm
Vikt: 23 kg

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate
Stand pipe Ø 60 mm
The support post Ø is 60 mm
The baseplate Ø is 250 mm
The bolthole Ø is 13 mm for M12 bolts

Parco armchair

Height: 77 cm
Armrest height: 63 cm
Sitting height: 45 cm
Vikt: 18 kg

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate, armrest in 6 mm sheet steel
The support post Ø is 60 mm (swivel version Ø 50 mm)
The baseplate Ø is 50 mm
The bolthole Ø is 13 mm for M12 bolts

Parco lounge chair

Width: 45 cm / 56cm
Height: 97 cm
Sitting height: 45 cm
Depth: 57 cm

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate
The support post Ø is 60 mm (swivel version Ø 50 mm)
The baseplate Ø is 50 mm
The bolthole Ø is 13 mm for M12 bolts

Parco stool

Width: 45 cm
Height: 45 cm
Sitting height: 45 cm
Depth: 42 cm
Vikt: 13 kg

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate
Stand pipe Ø 60 mm (swivel Ø 50 mm)
The baseplate Ø is 250 mm
The bolthole Ø is 13 mm for M12 bolts

Parco child seat

Width: 30 cm
Sitting height: 78.5 cm
Depth: 30 cm

The basket is made of flat steel with a round edge.

Parco barstool

Width: 42 cm
Height: 80 cm
Sitting height: 45 cm
Depth: 42 cm

Parco Conference Table

Length: 161 cm
Width: 100 cm
Height: 72 cm
Vikt: 46 kg

Foot plate Ø 40 cm.

Parco Bar Table

Height: 110 cm
Ø: 66 cm
Vikt: 37 kg

Parco Rectangular Table

Length: 161 cm
Width: 70 cm
Height: 72 cm
Vikt: 36 kg

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate
Stand pipe Ø 60 mm
The baseplate Ø is 250 mm
The bolthole Ø is 13 mm for M12 bolts

Parco armchair with tabletop

Height: 78 cm
Sitting height: 45 cm
Ø: 30 cm
Depth: 45 cm

Individual dimensions
The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate
The support post Ø is 60 mm (swivel Ø 50 mm)
The baseplate Ø is 250 mm
The bolthole Ø is 13 mm for M12 bolts

Parco rectangular bar table

Length: 161 cm
Width: 70 cm
Height: 110 cm

Product numbers and combinations

B11-06Startup cost for powder coating steel in a color other than standard. Choose a RAL colour.
B11-07Starting cost for another color of wood. Choose brown or grey for Linax or an NCS color for painted wood. If you want the same color on both steel and wood, choose the RAL color for both.

Append to product number

Wood and finish

JAT for jatoba.
EK for oiled oak.
SIOO for sioo:x treatment oak.
NCS S8000-N for top-glazed gray pine.
NCS S 2070-Y70R for top-glazed red pine.
C for any color top-glazed pine, at additional cost.

Metal surface finish

RAL 7022 for grey.
RAL 2001 for red.
RAL 9006 for light grey.
C for any color other than standard, at additional cost.

Installation type

M for in-ground.
N for surface mount.

Standard colours

RAL 2001
RAL 7022
RAL 9006
NCS S 2070-Y70R (Röd)
NCS S 8000-N (Grå)

Materials and surface treatments

Pine

Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.

Jatoba - FSC-certified

Our FSC-labeled Jatoba is an untreated, very hard, and strong hardwood with a long shelf life. It has a brown color with black accent stripes that changes to a deep and rich red color over time.

Oak

Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.

Water-based glaze

Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.

SiOO:X treatment

Sioo:x is a wood protection with environmentally friendly silicon technology. Water-based and biocide-free. We use Sioo mainly for our oak furniture. Sioo:x treatment of is suitable for all woods, outside as well as inside, and gives a light surface without pigments. The surface is UV-resistant, water-repellent and non-stick. Active and preventive action against algae, mould and pests. Also rot-proof, wood-strengthening and fire-retardant. This wood protection provides long durability and easy maintenance.

Wood oil

Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.

Steel

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated. This is done through electro-galvanization and powder coating, hot-dip galvanizing, or application of a zinc powder primer.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Assembly and placement

In-ground

Cast in ground.

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

The tables are fully assembled. The seating requires easy assembly with four M10 x 16 bolts provided.

Maintenance

Water-based glazed pine

Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order.

Oiled oak

Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.

Jatoba

Jotoba basically requires no maintenance apart from regular wiping down.

SiOO:X treatment oak

Sioo:x-treated products are treated twice upon delivery; once with a wood protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). 10-14 months after a product has been installed, it should be treated once more with Sioo:x Premium Surface Protection Altan for best durability. The lifespan after that is estimated to be about 10 years before it needs to be treated again with Premium Surface Protection Altan. The surface protection forms a wear surface, which means that products that are exposed to severe mechanical wear may need to be treated more often than every ten years. The surface treatment has a tested effect according to the standards EN 46 and EN 113. For information about the Sioo treatment see the website www.sioox.se.

Powdercoated steel

Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.

Download our general maintenance advice

Versions

Suites of furnitures with tables in different models / sizes, backed bench, bench, armchair, stool, bar stool, high/standing table, conference table, lounge chair, armchair with hanging table and child seat.

Available with swivel function or fixed, ground mounted or fastening (with foot plate).

Available in clear-lacquered pine or FSC-certified Jatoba wood. A choice of standard colours is available for an extra cost.

Character

The furniture group consists of stylish and generous furniture of high quality that can be mixed and matched to create customized seating arrangements.

Parco

Furniture Series

Design Broberg & Ridderstråle

When space is tight, outdoor furniture solutions like Parco make room for more. The group consists of sleek seating and a streamlined table that are easy to cluster together, making them ideal for compact spaces. The chairs are designed with a swivel function and contouring seats and backrests that provide additional comfort. The products can be mixed and matched to create customised seating arrangements in a variety of indoor and outdoor settings.

Certification

Parco in oiled jatoba. Åkersberga Railway Park.

Parco sofa with armrests and rectangular table, ground-mounted stands. Wood species oiled jatoba.

Designers

Broberg & Ridderstråle

Stockholm based Broberg & Ridderstråle Design & Architecture is founded and run by Mats Broberg and Johan Ridderstråle. The duo met at the University College of Arts, Crafts and Design (Konstfack) where they both studied furniture and interior design. Today they work within the fields of architecture and design. Their design method is based on the traditional craft, where they often gather inspiration from their daily lives only to then add a new twist to the design that lifts the product to a new level. Broberg & Ridderstråle have throughout the years designed numerous products and furniture series for Nola.