close

Korg furniture system with feet for free-standing furnishing.

System with end table mounted on armrests.

As an option, cushions are available in Tärnsjö leather with felt padding. For indoor use only.

Korg furniture system with feet for attachment above ground.

The modules come in different lengths. The size of a formation can thus be varied.

Test build a Korg system with the help of our Korg Planner. See below.

Korg

Modular Furniture System

Design Thomas Bernstrand

Crafted in the same style as the individual Korg products, this modular furniture system is as flexible as it is versatile. The system is comprised of armchairs, backed benches and modular units. An attachable version was designed for installation outdoors, while a freestanding model has been created for indoor use. Seat cushions upholstered in sustainably-sourced Swedish leather are available for the indoor models.

Try our Korg digital design tool to create unique solutions for a wide range of specific requirements.

Start the design tool Korg Planner!

Certification

Dimensions and weight

Korg system benches
Length: 114 cm
Depth: 42,4 cm
Height / seat height: 43,3 cm

Korg building system right / left part
Length: 118 cm
Depth: 60 cm
Height: 87 cm
Seat height: 43,3 cm

Korg building system middle part
Length: 80.8 / 101.1 / 161.6 cm
Depth: 60 cm
Height: 87 cm
Seat height: 43,3 cm

Korg building system convex corner section 90°
Length: 106 cm
Depth: 60 cm
Height: 87 cm
Seat height: 43,3 cm

Korg building system concave corner part 90°
Length: 108 cm
Depth: 60 cm
Height: 87 cm
Seat height: 43,3 cm

Individual dimensions
Tube seat basket 23 mm
Armrest in bent flat steel 38 mm
Leg stand 50 mm

Product numbers and combinations

U12-35FCKorg backed bench module only seat 808mm, straight middle section open on each side, electroplated steel, standard colour
U12-35FSCKorg backed bench module only seat1011mm, straight middle section open on each side, electroplated steel, standard colour
U12-35FLCKorg backed bench module only seat 1616mm, straight middle section open on each side, electroplated steel, standard colour
U12-35ECKorg backed bench only seat, concave corner section, electroplated steel, standard colour
U12-35DCKorg backed bench only seat, convex corner section, electroplated steel, standard colour
U12-35AC/HÖKorg backed bench module only seat, right-hand section, electroplated steel, standard colour
U12-35CC/VÄKorg backed bench module only seat, left-hand section, electroplated steel, standard colour
U12-32MC-BENKorg frame/legs for backed bench/modulesofa, ground-mounted, electroplated steel, standard colour, 1 unit
U12-32NC-BENKorg frame/legs for backed bench/modulesofa, attachable, electroplated steel, standard colour, 1 unit
U12-32FC-BENKorg frame/legs for backed bench/modulesofa, freestanding, electroplated steel, standard colour, 1 unit
U12-36Korg armrest for backed bench module, standard colour, 1 item
U12-36BORDKorg armrest/small table for backed bench module, standard colour, 1 item
U12-37MITTKorg bench only seat, straight middle section, electroplated steel, standard colour
U12-37SLUTKorg bench only seat, end section, electroplated steel, standard colour
U12-37MC-BENKorg frame/legs for bench, ground-mounted, electroplated steel, standard colour, 1 unit
U12-37NC-BENKorg frame/legs for bench attachable, electroplated steel, standard colour, 1 unit
U12-37FC-BENKorg frame/legs for bench, freestanding, electroplated steel, standard colour, 1 unit
B11-06Startup cost for powder coating steel in a color other than standard. Choose a RAL colour.

Append to product number

Metal surface finish

When ordering, specify which of our standard colors you want:
Dark blue/Grey RAL 5008, fine texture.
Black Noir 2200 Sablé, fine texture.
Red/Orange RAL 2002 (matt clear coat), fine structure.
C for any color other than standard, at additional cost.

Installation type

M for in-ground.
N for surface mount.

Standard colours

RAL 2002
RAL 5008
Noir 2200 Sablé

Materials and surface treatments

Zinc plated and powder coated steel in the standard colors black Noir 2200 Sablé, red / orange RAL 2002 or gray / blue RAL 5008.
Specify colour of choice when ordering.
Other colors are available at an additional cost.

Steel

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated. This is done through electro-galvanization and powder coating, hot-dip galvanizing, or application of a zinc powder primer.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Assembly and placement

Freestanding

Freestanding product that is placed directly on the ground.

In-ground

Cast in ground.

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

Mounted to the ground.

Maintenance

Powdercoated steel

Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.

Download our general maintenance advice

Versions

Construction system in different parts.

Character

Construction system with delicate, expressive wired furniture for outside environments.

Korg

Modular Furniture System

Design Thomas Bernstrand

Crafted in the same style as the individual Korg products, this modular furniture system is as flexible as it is versatile. The system is comprised of armchairs, backed benches and modular units. An attachable version was designed for installation outdoors, while a freestanding model has been created for indoor use. Seat cushions upholstered in sustainably-sourced Swedish leather are available for the indoor models.

Try our Korg digital design tool to create unique solutions for a wide range of specific requirements.

Start the design tool Korg Planner!

Certification

Korg furniture system outside Chalmers University of Technology in Gothenburg. The picture shows a bench with and without a back.

”The tool is intended to support architects in their creative work”

New tool! Korg Planner!

Now there is a new digital planning tool for the Korg furniture system. The tool makes it possible to spatially create and test ideas and solutions according to your specific requirements. The planning tool is intended to support architects in their creative work, at the same time giving a concrete result with a clear product specification.


Try Korg Planner!

Designers

Thomas Bernstrand

Designer Thomas Bernstrand, who owns his own design studio in Stockholm, has participated in a large number of design and art exhibitions around the world such as MoMA in New York, Colette in Paris, Biennale Design Saint-Etienne and others.

Bernstrand has received several awards for his work, including Excellent Swedish Form and Winner of the Good Design Award 2012 for Nolastolen Share. For Nola, Bernstrand has designed a large number of products and furniture series and participated in a number of special projects over the years.