The Kalmarsund bench is a versatile design that can be combined with a range of parts to create a customised bench. The bench’s slated seat enables it to dry quickly when wet, making it an excellent choice for areas without shelter. Part of the Kalmar furniture suite, Kalmarsund can be fitted with a backrest, which has been designed with a slight curve to cradle the back comfortably.
Length: 187 cm
Width: 57 cm
Armrest height: 66 cm
Sitting height: 46 cm
Weight 25 kg
Individual dimensions
Wooden components: Seat: 30 mm x 95 mm
Back steel/undercarriage: 50 x 12 mm
Armrest: 50 x 20 x 2mm
Diameter of legs: 48 mm x 3.2 mm
MH for oiled mahogany.
LIN for linax impregnated pine.
EK for oiled oak.
A for coated pine, light green NCS S 6010-G10Y.
H for coated pine, maroon NCS S 4550-Y80R.
GRÅ for coated pine, grey NCS S 5502-B
C for coated pine any color, starting cost is added.
RAL 9005
C for any color other than standard, at additional cost.
N for surface mount.
M for in-ground.
V for mounted to wall.
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
FSC-marked mahogany is a wood with good durability in the outdoor environment. In addition, it retains its color tone better than, for example, oak and teak. Mahogany lives and moves, sometimes more than teak.
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Varnishing of wood is done with a oil-based varnish. Under normal use, the paint has a good wear resistance and long durability.
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
After traditional impregnation according to NTR AB, the wood is boiled in a hot linseed oil with or without color pigments under vacuum. The oil is penetrated into the surface on all six sides, which reduces moisture absorption in the wood and gives a dimensionally stable product over time. The result is a dried product with good resistance to rot that also has long maintenance intervals. Linax-impregnated furniture is intended for outdoor environments only.
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Cast in ground.
Bolted in place to stand/wall bracket.
Bolts for walls not included.
The seat and legs should be assembled on site with the bolts provided.
Products treated with oil-based topcoat must be maintained regularly with alkyd oil paint. Maintenance intervals approx. 1 time per year. Damage and cracks should be repaired immediately. Paint on spray packaging are available in standard colors to order.
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.
Oiled mahogany should be oiled two times a year.
Linax is a linseed oil-based impregnation that provides extra long durability in outdoor environments and corresponds to impregnation class AB. The impregnated wood turns gray over time, which means that it should be re-oiled if necessary. Use a linseed-based oil for impregnated materials.
Products that are powder-coated can be touch-up painted with alkyd paint.
/
The Kalmarsund bench is a versatile design that can be combined with standard parts to create a customised bench.
The Kalmarsund bench is a versatile design that can be combined with a range of parts to create a customised bench. The bench’s slated seat enables it to dry quickly when wet, making it an excellent choice for areas without shelter. Part of the Kalmar furniture suite, Kalmarsund can be fitted with a backrest, which has been designed with a slight curve to cradle the back comfortably.
