The proportions of this bench are generous and spacious, brought together in a contemporary style. Highsofa belongs to a modern furniture group that includes a range of seating.
Robust, stable but still modern furniture group which consists of armchair, stool, chair, bench and sofa bed. Built on gable sides of laser cut steel sheet. The seat boards that are screwed to the stand allow the furniture group to withstand a tough environment. The shape is generous, stylish and spacious. Low / High furniture group is approved in Svanens Husportal (ek) and is environmentally assessed via Byggvarubedömningen och SundaHus
Length: 2-sits 90 cm
Width: 1-sits 45 cm
Height: 83 cm
Sitting height: 45cm
Seat height: 45 cm. Total height: 82.9 cm. Total width: 90 cm.
EK for oiled oak.
SIOO for sioo:x treatment oak.
GR for gray Gris 2150 Sablé.
V for white RAL 9010.
C for any color of steel, at an additional cost. Choose a RAL colour.
A for armrest.
N for surface mount.
Oiled oak
Powder-coated steel grey
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Sioo:x is a wood protection with environmentally friendly silicon technology. Water-based and biocide-free. We use Sioo mainly for our oak furniture. Sioo:x treatment of is suitable for all woods, outside as well as inside, and gives a light surface without pigments. The surface is UV-resistant, water-repellent and non-stick. Active and preventive action against algae, mould and pests. Also rot-proof, wood-strengthening and fire-retardant. This wood protection provides long durability and easy maintenance.
Freestanding product that is placed directly on the ground.
Levereras monterad för fastsättning mot golv/mark. Bult mot mark ingår ej.
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.
Sioo:x-treated products are treated twice upon delivery; once with a wood protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). Directly after a product has been installed, it should be treated once more with Sioo:x Premium Surface Protection Altan for best durability. After that, every 12 months. The surface protection forms a wear surface, which means that products that are exposed to severe mechanical wear may need to be treated more often than every ten years. The surface treatment has a tested effect according to the standards EN 46 and EN 113.
For information about the Sioo treatment see the website www.sioox.se.
Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.
1-sits och 2-sits stol, soffa. Vilbädd, möbelsystem samt loungefåtölj med fotpall.
This product belongs to a contemporary furniture group consisting of chairs and back benches.
Robust, stable but still modern furniture group which consists of armchair, stool, chair, bench and sofa bed. Built on gable sides of laser cut steel sheet. The seat boards that are screwed to the stand allow the furniture group to withstand a tough environment. The shape is generous, stylish and spacious. Low / High furniture group is approved in Svanens Husportal (ek) and is environmentally assessed via Byggvarubedömningen och SundaHus
Thanks to High Chair and High Sofa, you can sit comfortably as a spectator in Västerås skatepark.
With a surface of 2,400 square metres, Västerås’ new skate park is one of the largest in Sweden. Built for skateboarding, inline skating, kick-biking and BMX-riding. The park was designed by Horn.Uggla.
Interior and furniture designer, crafter and tutor living in Stockholm. Educated at Aarhus School of Architecture, Denmark. Has his own design studio and workshop in Stockholm since 1995. Has worked as a professor and artistic leader at Steneby HDK, as a lecturer at Konstfack University College of Arts, Crafts & Design and as a guest teacher at Beckmans Design College.
