This swivel chair strikes a perfect balance between functionality and form. The seat and backrest are crafted in a single expression that extends from the base to the full height of the chair. The seat is created by slats of oiled oak attached to side panels made from laser-cut steel. The chair’s slatted construction and robust structure create an all-weather ergonomic seat accessible to a wide range of body types and abilities.
Width: 68 cm med armstöd. 56 cm utan armstöd
Height: 104 cm
Sitting height: 46 cm
Depth: 67 cm
Vikt: 50 kg
N för Surface mount.
M för In-ground.
A for armrests
Powder coated steel in RAL 5021 (Sea blue). Seat in oiled red oak.
Cumaru is sometimes called Brazilian Teak and is a hard and durable type of wood. The wood changes in a red/brown shade and does not need surface treatment thanks to its natural properties. Over the years Cumarun ages in a beautiful silver gray tone.
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.
Sioo:x is a wood protection with environmentally friendly silicon technology. Water-based and biocide-free. We use Sioo mainly for our oak furniture. Sioo:x treatment of is suitable for all woods, outside as well as inside, and gives a light surface without pigments. The surface is UV-resistant, water-repellent and non-stick. Active and preventive action against algae, mould and pests. Also rot-proof, wood-strengthening and fire-retardant. This wood protection provides long durability and easy maintenance.
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Freestanding product that is placed directly on the ground.
Cast in ground.
Posts for installation in pre-cast foundations.
Partially assembled.
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.
Sioo:x-treated products are treated twice upon delivery; once with a wood protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). 10-14 months after a product has been installed, it should be treated once more with Sioo:x Premium Surface Protection Altan for best durability. The lifespan after that is estimated to be about 10 years before it needs to be treated again with Premium Surface Protection Altan. The surface protection forms a wear surface, which means that products that are exposed to severe mechanical wear may need to be treated more often than every ten years. The surface treatment has a tested effect according to the standards EN 46 and EN 113. For information about the Sioo treatment see the website www.sioox.se.
Cumaru shifts in a reddish shade and does not need any maintenance thanks to its natural properties. Over the years Cumaru ages into a beautiful silver gray tone.
Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.
With or without armrests.
A swivel chair with a perfect balance between functionality and form. A robust structure create an all-weather ergonomic chair.
This swivel chair strikes a perfect balance between functionality and form. The seat and backrest are crafted in a single expression that extends from the base to the full height of the chair. The seat is created by slats of oiled oak attached to side panels made from laser-cut steel. The chair’s slatted construction and robust structure create an all-weather ergonomic seat accessible to a wide range of body types and abilities.
Interior and furniture designer, crafter and tutor living in Stockholm. Educated at Aarhus School of Architecture, Denmark. Has his own design studio and workshop in Stockholm since 1995. Has worked as a professor and artistic leader at Steneby HDK, as a lecturer at Konstfack University College of Arts, Crafts & Design and as a guest teacher at Beckmans Design College.
