close

This installation aligned several sets of single-sided Goggle units to create a contemporary bike park in a modern urban setting.

Goggle

Bicycle Rack

Design Erik Österlund

The Goggle bike rack is characterised by hot-dip galvanised steel hoops fastened to horizontal bars. The hoops are constructed from pairs of circular metal sized to hold a bicycle wheel. A range of single-sided and double-sided rack alternatives are available, making Goggle a uniquely versatile system. The hoops can be attached to a base plate, a single bar, a double-sided rack or secured to a purpose-built structure for a decorative effect. The ground-mounted single-sided version is also available with a wooden standing-seat along the top.

Certification

245 cm
39 cm
48 cm
245 cm
69 cm
60 cm

Dimensions and weight

Length: 245 cm
Width: 138 cm
Height: 37 cm / 90 cm
Ø: 7.6 cm / 31 cm
Depth: 39 cm / 69 cm

Bicycle rack pipe Ø76cm. Wheel holder Ø31cm. Spread foot plate Ø15cm. Wheel holder solid steel Ø1cm.

Single bike rack 5 bike places 26 kg, double bike rack 36 kg, attachment pipe 8 kg.

Single-sided version: C-C distance between posts: 230 cm. Length including base plate: 245 cm Height: 37 cm Depth: 39 cm Diameter of wheel holders: 31 cm Wheel holder steel ribbon Ø: 1.2 cm Vertical rail Ø: 7.6 cm Weight of single version: 26 kg

Weight of each post for installation: 8 kg.

Double-sided version: C-C distance between posts: 230 cm. Length including base plate: 246 cm Height: 37 cm Depth: 69 cm Diameter of wheel holders: 31 cm Wheel holder steel ribbon Ø: 1.2 cm Vertical rail Ø: 7.6 cm Weight of double version: 36 kg

Weight of each post for installation: 8 kg.

Product numbers and combinations

Ö03-45V/4Wall-mounted bike rack with 4 wheel-holders
Ö03-45V/5Wall-mounted bike rack with 5 wheel-holders
Ö03-45Bike rack with 5 wheel-holders on one side
Ö03-47Bike rack with 10 wheel-holders on one side
Ö03-48Double-sided bike rack with 20 wheel-holders in total
Ö03-46Double-sided bike rack with 10 wheel-holders in total
Ö03-45/STÅSingle-sided bike rack with 5 wheel-holders, vertical top beam, ground-mounted
Ö03-45/3STÅSingle-sided bike rack with 3 wheel-holders, vertical top beam, ground-mounted
Ö03-45/4STÅSingle-sided bike rack with 4 wheel-holders, vertical top beam, ground-mounted
Ö03-46/STÅSingle-sided bike rack with 10 wheel-holders, vertical top beam, ground-mounted
*
DELAR FÖR ATT BYGGA DIN EGEN KOMBINATIONPlease contact Nola for suggestions about how several units can be combined.
*
Ö03-47/3Single-sided bike rack with 3 wheel-holders, 110 cm
Ö03-47/4Single-sided bike rack with 4 wheel-holders, 160 cm
Ö03-47/5Single-sided bike rack with 5 wheel-holders, 210 cm
Ö03-47/5USingle-sided bike rack WITHOUT HOLES, 210 cm
Ö03-47/8Double-sided bike rack with 8 wheel-holders, 160 cm
Ö03-48/1End post with 14 cm base plate
Ö03-48/2Mid-post with 40 cm base plate
Ö03-47MH-2Vertical top beam with standing-seat in oiled mahogany
Ö03-47/7-1Bracket for standing-seat in combination with sign and angle post
Ö03-47/7-4Vertical top beam with standing-seat for unit with 4 wheel-holders
Ö03-47/7-5Vertical top beam with standing-seat for unit with 5 wheel-holders
Ö03-47/10Double-sided bike rack with 10 wheel-holders, 210 cm
Ö03-49MPost for insertion into cast-concrete and for all ground-mounted installations
Ö03-48/4End post for standing-seat version with baseplate
Ö03-48/5Mid-post for standing-seat version with baseplate
Ö03-48/6End post extended for standing-seat in combination with sign and angle post
Ö03-48/7Angle post for standing-seat in combination with sign
Ö03-48MH/SKYLTVertical top beam with standing-seat in oiled mahogany with sign included
Ö03-49Wheel-holder, round
Ö03-49RLWheel-holder, extended for lock

Append to product number

M för In-ground.
N för Surface mount.
V för Mounted to wall.
C = for choice of non-standard colour, additional fee applies

Standard colours

RAL 9005
Noir 2200 Sablé
Gris 2900 Sablé

Materials and surface treatments

Steel

Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Hot-dip galvanized

Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Assembly and placement

In-ground

Cast in ground.

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

Mounted to wall

Bolted in place to stand/wall bracket.

Bolts for walls not included.

Some assembly required on site.

Maintenance

Hor dip galvanized steel

Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".

Powdercoated steel

Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.

Download our general maintenance advice

Variants

Available in single or double-sided versions, wall-mounted or topped with a wooden standing-seat. An extended wheel-holder with space for several locks is available.
Goggle bike racks are standard models. If you would like to combine several units to create an extended length, select the Ö03-49M model tubes for ground installation.
Please contact Nola for suggestions and advice if you would like to combine several units to create a unique configuration for a site.

Character

The Goggle bicycle rack is made with a range of alternatives, making it a uniquely versatile system.

Goggle

Bicycle Rack

Design Erik Österlund

The Goggle bike rack is characterised by hot-dip galvanised steel hoops fastened to horizontal bars. The hoops are constructed from pairs of circular metal sized to hold a bicycle wheel. A range of single-sided and double-sided rack alternatives are available, making Goggle a uniquely versatile system. The hoops can be attached to a base plate, a single bar, a double-sided rack or secured to a purpose-built structure for a decorative effect. The ground-mounted single-sided version is also available with a wooden standing-seat along the top.

Certification

Designers