The Sidewalk furniture group is characterised by clean lines and precise angles that give it a contemporary character. The frames and legs are made from lengths of square steel treated with a silvery finish, complemented by wooden parts that showcase the beauty of painted wood. The seats and tabletop are supported by steel posts that bolt to the ground, creating a stable, immovable base.
BACKED BENCH
Length: 180 cm Depth: 47.5 cm Height: 87.4 cm Seat height: 46 cm Height of armrest: 68.5 cm Weight: 43.7 kg
BENCH
Length: 180 cm Depth: 40 cm Height: 74 cm Seat height: 46 cm Height of armrest: 68.5 cm Weight: 32 kg
TABLE
Length: 144 cm Depth: 70 cm Weight: 40.5 kg
Length: 180 cm
Width: 40 cm
Sitting height: 46 cm
Weight 32 kg
Length: 180 cm
Height: 87 cm
Armrest height: 68.5 cm
Sitting height: 46 cm
Depth: 47.5 cm
Weight 43,7 kg
Length: 144 cm / 72 cm
Width: 70 cm
Height: 74 cm
Weight of rectangular table: 40.5 kg
Weight of square table: 24 kg
Width: 36 cm / 54 cm
Height: 86 cm
Armrest height: 68.5 cm
Sitting height: 46 cm
Sitting depth: 45 cm / 47.5 cm
Depth: 45 cm / 47.5 cm
Weight of chair / armchair: 12 kg / 18 kg
Width of chair / armchair: 36 cm / 54 cm
Depth of chair / armchair: 45 cm / 47.5 cm
Height of armrest: 68.5 cm
Width: 36 cm
Height: 107 cm
Sitting height: 80 cm
Depth: 45 cm
Weight 20,5 kg
SIOO for sioo:x treatment oak.
G for RAL 1023 yellow for top-glazed pine.
C for any color other than standard, at additional cost.
Specify color choice for steel when ordering.
RAL 7035 is standard.
C for any color other than standard, at additional cost.
PURGS for seat in PUR grey-black NCS 8502-B (bench seat only).
PURGR for seat in PUR green NCS S 8010-G10Y (bench seat only).
Sofa with seat in PUR is delivered with back/armrest in top-glazed pine in the same colour.
C for any color other than standard, at additional cost.
N for surface mount.
M for in-ground.
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Polyurethan foam is a highly elastic polymer product and provides a bouncy structure and feels extra comfortable to sit on. With its attributes such as being allergy-neutral, long-lasting and fire- and flame-resistant, it can easily be used in public environments.
Sioo:x is a wood protection with environmentally friendly silicon technology. Water-based and biocide-free. We use Sioo mainly for our oak furniture. Sioo:x treatment of is suitable for all woods, outside as well as inside, and gives a light surface without pigments. The surface is UV-resistant, water-repellent and non-stick. Active and preventive action against algae, mould and pests. Also rot-proof, wood-strengthening and fire-retardant. This wood protection provides long durability and easy maintenance.
Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Cast in ground.
The seat, tabletop and bench surfaces are pre-assembled. The seat requires attachment to the frame.
Sioo:x-treated products are treated twice upon delivery; once with a wood protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). After 12 - 18 months, for best durability, the surface should be treated once more with Sioo:x Premium Ytskydd Altan. It is important to keep the product clean, otherwise the surface protection can be destroyed. Products that are exposed to heavy mechanical wear may need extra treatments.The surface treatment has a tested effect according to the standards EN 46 and EN 113.
For information about the Sioo treatment see the website www.sioox.se.
Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order.
Products that are powder-coated can be touch-up painted with alkyd paint.
Furniture group with sofa, bench, table and chair. Can be adapted based on request.
Characterised by clean lines and precise angles that give it a contemporary character.
The Sidewalk furniture group is characterised by clean lines and precise angles that give it a contemporary character. The frames and legs are made from lengths of square steel treated with a silvery finish, complemented by wooden parts that showcase the beauty of painted wood. The seats and tabletop are supported by steel posts that bolt to the ground, creating a stable, immovable base.
White Arkitekter is one of Sweden’s leading architectural offices. With a focus on sustainable architecture, design and city planning, they aim to work for both the current and future generation. White Arkitekter’s aim is to through architecture be able to drive the transition towards a sustainable life.
Andreas Sture is a designer at White Architecture where he participates in the process of developing and designing sustainable products.
