close

Dimensions and weight

Minimal Bench

Length: 1-sits: 40 cm, 2-sits: 80,4 cm, 3-sits: 121 cm
Width: 40 cm
Height: 46 cm
Sitting height: 46 cm

One-seater: Length: 40 cm Width: 40 cm Seat height: 46 cm Weight: 11 kg.

Two-seater: Length: 80.4 cm Width: 40 cm Height: 46 cm Weight: 16 kg.

Three-seater: Length: 121 cm Width: 40 cm Height: 46 cm Weight: 21 kg w/ steel frame, 14 kg in beech.

Individual dimensions:

Weight of bench with steel frame: 21 kg.

Weight of bench in beech: 14 kg.

Thickness of seat: 25 mm.

Dimensions of steel frame: 40 mm x 2 mm.

Dimensions of stand in beech 40 x 40 mm.

Minimal table

Length: 121 cm
Width: 70 cm
Height: 70 cm
Vikt: 35 kg

Individual dimensions

The frame measures 40 mm x 40 mm x 2 mm

Standard colours

RAL 9005 finstruktur

Materials and surface treatments

Vitoljad bok.

Beech

The wood of the beech is hard and tough. The wood is striated, which means that the grains are evenly distributed over the entire annual ring. The annual rings are visible, and the wood has an even structure. The color of the wood is yellow, red or brownish-white.

Oak

Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.

Steel

Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.

Wood oil

Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Assembly and placement

Freestanding

Freestanding product that is placed directly on the ground.

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

Levereras färdigmonterad.

Maintenance

Oiled oak

Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.

Powdercoated steel

Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.

Download our general maintenance advice

Variants

Bänk och bord.

Character

Stilren möbelgrupp för inomhusbruk.

Products in furniture group