The Arki is a robust park bench with a uniquely weightless design. The bench’s vertical slats enable light to pass through its structure, creating a boldly contrasting surface pattern. The bench rests on two symmetrical steel cubes, each balancing the surface weight between them. Arki’s rectilinear profile is softened by its subtle parallel lines, enabling it to blend in with natural settings as well as architectural backgrounds.
Length: 180 cm
Width: 47 cm
Height: 75 cm
Sitting height: 45 cm
ARKI 2710 Soffa Arki
JAT for jatoba.
M for in-ground.
Our FSC-labeled Jatoba is an untreated, very hard, and strong hardwood with a long shelf life. It has a brown color with black accent stripes that changes to a deep and rich red color over time.
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Cast in ground.
Fully assembled.
Jotoba basically requires no maintenance apart from regular wiping down.
Products that are powder-coated can be touch-up painted with alkyd paint.
Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
Available with a backrest or without.
Arki is a uniquely weightless outdoor bench suited natural settings and architectural backgrounds.
The Arki is a robust park bench with a uniquely weightless design. The bench’s vertical slats enable light to pass through its structure, creating a boldly contrasting surface pattern. The bench rests on two symmetrical steel cubes, each balancing the surface weight between them. Arki’s rectilinear profile is softened by its subtle parallel lines, enabling it to blend in with natural settings as well as architectural backgrounds.
