The wall-mounted version of the No 2 bench was installed at a transport centre in Örnsköldsvik, Sweden. Luma benches were installed at a transport centre in Örnsköldsvik, Sweden. Luma benches were installed at a transport centre in Örnsköldsvik, Sweden. The Luma bench, shown at a transport centre in Örnsköldsvik, Sweden. The wall-mounted version of the No 2 bench was installed at a transport centre in Örnsköldsvik, Sweden. The No 2 bench and Rekta litterbin were installed at a transport centre in Örnsköldsvik, Sweden. Luma benches installed at a transport centre in Örnsköldsvik, Sweden. Luma benches installed at a transport centre in Örnsköldsvik, Sweden. Luma benches installed at a transport centre in Örnsköldsvik, Sweden. The No 2 bench and Rekta litterbin were installed at a transport centre in Örnsköldsvik, Sweden. Luma benches installed at a transport centre in Örnsköldsvik, Sweden.

Örnsköldsvik transport centre

The transport centre in Örnsköldsvik, Sweden is a busy hub with open areas for public egress and recessed niches for seating. Luma benches were installed in window bays to provide discreet seating without blocking the light. Wall-mounted versions of the No 2 backed benches were attached to the walls to maximise comfort while saving space. Since no base is required for wall-mounted seating, it is quicker and easier for maintenance staff to clean underneath. Rekta litterbins, with their streamlined surfaces and recognisable shapes, were the perfect match to the benches and complemented the transport centre’s architecture too.

 

 

 

Dimensions
LUMA BENCH
Straight bench length: 180 cm / 260 cm
Straight bench width: 42 cm
Maximum length of wooden section: 250 cm

NO 2 BACKED BENCH
Length: 177 cm
Width: 63 cm
Height: 81 cm
Seat height: 46 cm
Weight: 64 kg

REKTA LITTERBIN
Height: 71 cm
Width: 40 cm
Length: 55 cm
Weight: 29 kg
Volume: 134 l
Product number
U18-35 Luma bench length 180 cm
U18-37 Luma bench length 260 cm
U18-39 Luma bench custom length (maximum length 260 cm)
U18-62 No 2 backed bench walled-mounted version
U04-29S Rekta litterbin w/ three openings
U04-30S Rekta litterbin w/ one opening
Assembly
The Luma bench is fully assembled.

The No 2 backed bench's frame should be installed to the wall with bolts suitable for the wall material and the weight of the bench.

The Rekta litterbin is fully assembled.
Variants
The No 2 backed bench's seat and backrest are available in oiled teak, oiled oak or painted pine.

The Rekta litterbin is available with either one opening or three.
Materials
LUMA BENCH
The frame is made in steel pipe and flat steel. The slats are made in oiled oak. Other kinds of wood and steel are available upon request.

No 2 BACKED BENCH
The steel parts in the frame are sand-blasted, zinc-electroplated and polyester powder-coated in standard colour grey RAL 7016. The slats are made in pine painted with alkyd oil enamel, oiled oak or oiled teak.

REKTA LITTERBIN
The container is made in 4 mm perforated sheet steel. The steel is zinc-electroplated and polyester powder-coated in silver. The litterbin is fitted with rubber feet.
Additional description number
LUMA BENCH
M = Ground-mounted version
N = Attachable version
F = Freestanding

No 2 BACKED BENCH
E = Oak
T = Teak
A = Pine painted with alkyd oil enamel light green NCS S6010-G10Y
H = Pine painted with alkyd oil enamel reddish-brown NCS S4550-Y80R
Maintenance
Oiled wood should be maintained regularly, at least twice a year. Over time oak darkens and turns grey. Stainless steel does not normally require maintenance. Polyester powder-coated steel can be repainted with alkyd oil enamel as needed.
Character
Architects installed Luma benches, No 2 backed benches and Rekta litterbins were at this transport centre in Örnsköldsvik, Sweden. We collaborated with the architects to ensure that the products suited the space perfectly.